(A) registration number
(B) date of first registration of the vehicle
(C) personal data
(C.1) holder of the registration certificate
(C.1.1) surname or business name
(C.1.2) other name(s) or initial(s) (where appropriate)
(C.1.3) address in the Member State of registration on the date of issue of the document
(C.2) owner of the vehicle
(C.2.1) surname or business name
(C.2.2) other name(s) or initial(s) (where appropriate)
(C.2.3) address in the Member State of registration, on the date of issue of the document
(C.3) natural or legal person who may use the vehicle by virtue of a legal right other than that of ownership
(C.3.1) surname or business name
(C.3.2) other name(s) or initial(s) (where appropriate)
(C.3.3) address in the Member State of registration, on the date of issue of the document
(C.4) Where the particulars specified in VI, code C.2 are not included in the registration certificate, reference to the fact that the holder of the registration certificate (a) is the vehicle owner (b) is not the vehicle owner (c) is not identified by the registration certificate as being the vehicle owner
(C.5), (C.6) where a change in the personal data given in point VI, code C.2 and/or point VI, code C.3 does not give rise to the issue of a new Part II of the registration certificate, the new personal data corresponding to these points may be included under codes (C.5) or (C.6); they are broken down in accordance with point VI, code C.2 and point VI, code C.3
(C.5), (C.6), (C.7), (C.8) where a change in the personal data given in points V, code C.1, VI, code C.2 and/or VI, code C.3 does not give rise to the issue of a new registration certificate, the new personal data corresponding to these points may be included under codes (C.5), (C.6), (C.7) or (C.8); they are then broken down in accordance with the references in points V, code C.1, VI, code C.2, VI, code C.3 and V, code C.4
(D) vehicle
(D.1) make
(D.2) type - variant (if available) - version (if available)
(D.3) commercial description(s)
(E) vehicle identification number
(F) mass
(F.1) maximum technically permissible laden mass, except for motorcycles
(F.2) maximum permissible laden mass of the vehicle in service in the Member State of registration
(F.3) maximum permissible laden mass of the whole vehicle in service in the Member State of registration
(G) mass of the vehicle in service with bodywork, and with coupling device in the case of a towing vehicle in service from any category other than M1
(H) period of validity, if not unlimited
(I) date of the registration to which this certificate refers
(J) vehicle category
(K) type-approval number (if available)
(L) number of axles
(M) wheelbase (in mm)
(N) for vehicles with a total exceeding 3500 kg, distribution of the technically permissible maximum laden mass among the axles:
(N.1) axle 1 (in kg)
(N.2) axle 2 (in kg), where appropriate
(N.3) axle 3 (in kg), where appropriate
(N.4) axle 4 (in kg), where appropriate
(N.5) axle 5 (in kg), where appropriate
(O) technically permissible maximum towable mass of the trailer
(O.1) braked (in kg)
(O.2) unbreaked (in kg)
(P) engine
(P.1) capacity (in cm3)
(P.2) maximum net power (in kW) (if available)
(P.3) type of fuel or power source
(P.4) rated speed (in min-1)
(P.5) engine identification number
(Q) power/weight ratio (in kW/kg) (only for motorcycles)
(R) colour of the vehicle
(S) seating capacity
(S.1) number of seats, including the driver’s seat
(S.2) number of standing places (where appropriate)
(T) maximum speed (in km/h)
(U) sound level
(U.1) stationary (in dB(A))
(U.2) engine speed (in min-1)
(U.3) drive-by (in dB(A))
(V) exhaust emissions
(V.1) CO (in g/km or G/kWh)
(V.2) HC (in g/km or g/kWh)
(V.3) NOx (in g/km or g/kWh)
(V.4) HC + NOx (in g/km)
(V.5) particulates for diesel (in g/km or g/kWh)
(V.6) corrected absorption coefficient for diesel (in min-1)
(V.7) CO2(in g/km)
(V.8) combined fuel consumption (in L/100 km)
(V.9) indication of the environmental category of EC type-approval; reference to the version applicable pursuant to Directive 70/220/EEC(2) or Directive 88/77/EEC(3)
(W) fuel tank(s) capacity (in litres)
Security features
Security printing
Location: Security printing
Characteristics: Basic security printing motif consisting of hexagon graphics and anti-copy patterns
Method of verification: Magnifying glass
Rainbow printing
Location: Whole body
Characteristics: Printed line structures with a smooth colour transition
Method of verification: Magnifying glass
Positive micro printing
Location: Front and back of the document, bottom right corner
Characteristics: Positive printed very small characters, visible only when magnified
Method of verification: Magnifying glass
Negative VIN
Location: Front of the document, bottom right corner
Characteristics: Number in negative form (negative characters) personalised by laser engraving technology
Method of verification: Viewing with the naked eye
Ultraviolet (UV) overprint
Location: Front of the document, in the middle
Characteristics: A printed graphical design only visible under UV light
Method of verification: UV lamp
Colour-shifting ink
Location: Front of the document, upper right corner
Characteristics: Motif of the coat of arms of Slovakia printed in a special colour characterised with hue change (from magenta to green) depending on the angle of view
Method of verification: Naked eye, with light from top or oblique angle, tilting
Laminate embossing
Location: Front of the document, left side
Characteristics: A tyre track and the text “SVK”.
Method of verification: Viewing with the naked eye or a magnifying glass or by tilting the card or by touching with fingertips
Personalisation
Location: Front and back of the document.
Characteristics: The vehicle data is personalised by laser engraving technology
Method of verification: Viewing with the naked eye
CLI element
Location: Front of the document, bottom right corner
Characteristics: Laser-engraved element with tilting effect. Two elements are engraved in a lens structure, the car registration number and last seven digits of the VIN.
Method of verification: Viewing with the naked eye with light from oblique angle or with a magnifying glass and tilting or by touching with fingertips
Chip
Location: Front of the document, left side
Characteristics: The chip stores information about the vehicle and its owner enabling electronic use of the document. The chip content is secured by active and passive authentication mechanisms.
Method of verification: Naked eye and by touching with fingertips
Transparent Kinegram® patch
Location: Back of the document, upper side
Characteristics: A transparent patch partially covers the VIN. It contains changeable moving patterns and colourful images.
Method of verification: Naked eye, with light from top or oblique angle, tilting.
Ultraviolet (UV) overprint
Location: Back of the document, in the middle
Characteristics: A printed graphical design which is only visible under UV light
Method of verification: UV lamp
Colour-shifting ink
Location: Back of the document, bottom right corner
Characteristics: “eVRC” printed in a special colour characterised with hue change (from magenta to green), depending on the angle of view
Method of verification: Naked eye, with light from top or oblique angle, tilting
Part II
Physical description
Size (Format): 297 x 210 mm (A4)
Material: Paper
Colour: Blue-yellow-green
(A) registration number
(B) date of first registration of the vehicle
(C) personal data
(C.1) holder of the registration certificate
(C.1.1) surname or business name
(C.1.2) other name(s) or initial(s) (where appropriate)
(C.1.3) address in the Member State of registration on the date of issue of the document
(C.2) owner of the vehicle
(C.2.1) surname or business name
(C.2.2) other name(s) or initial(s) (where appropriate)
(C.2.3) address in the Member State of registration, on the date of issue of the document
(C.3) natural or legal person who may use the vehicle by virtue of a legal right other than that of ownership
(C.3.1) surname or business name
(C.3.2) other name(s) or initial(s) (where appropriate)
(C.3.3) address in the Member State of registration, on the date of issue of the document
(C.4) Where the particulars specified in VI, code C.2 are not included in the registration certificate, reference to the fact that the holder of the registration certificate (a) is the vehicle owner (b) is not the vehicle owner (c) is not identified by the registration certificate as being the vehicle owner
(C.5), (C.6) where a change in the personal data given in point VI, code C.2 and/or point VI, code C.3 does not give rise to the issue of a new Part II of the registration certificate, the new personal data corresponding to these points may be included under codes (C.5) or (C.6); they are broken down in accordance with point VI, code C.2 and point VI, code C.3
(C.5), (C.6), (C.7), (C.8) where a change in the personal data given in points V, code C.1, VI, code C.2 and/or VI, code C.3 does not give rise to the issue of a new registration certificate, the new personal data corresponding to these points may be included under codes (C.5), (C.6), (C.7) or (C.8); they are then broken down in accordance with the references in points V, code C.1, VI, code C.2, VI, code C.3 and V, code C.4
(D) vehicle
(D.1) make
(D.2) type - variant (if available) - version (if available)
(D.3) commercial description(s)
(E) vehicle identification number
(F) mass
(F.1) maximum technically permissible laden mass, except for motorcycles
(F.2) maximum permissible laden mass of the vehicle in service in the Member State of registration
(F.3) maximum permissible laden mass of the whole vehicle in service in the Member State of registration
(G) mass of the vehicle in service with bodywork, and with coupling device in the case of a towing vehicle in service from any category other than M1
(H) period of validity, if not unlimited
(I) date of the registration to which this certificate refers
(J) vehicle category
(K) type-approval number (if available)
(L) number of axles
(M) wheelbase (in mm)
(N) for vehicles with a total exceeding 3500 kg, distribution of the technically permissible maximum laden mass among the axles:
(N.1) axle 1 (in kg)
(N.2) axle 2 (in kg), where appropriate
(N.3) axle 3 (in kg), where appropriate
(N.4) axle 4 (in kg), where appropriate
(N.5) axle 5 (in kg), where appropriate
(O) technically permissible maximum towable mass of the trailer
(O.1) braked (in kg)
(O.2) unbreaked (in kg)
(P) engine
(P.1) capacity (in cm3)
(P.2) maximum net power (in kW) (if available)
(P.3) type of fuel or power source
(P.4) rated speed (in min-1)
(P.5) engine identification number
(Q) power/weight ratio (in kW/kg) (only for motorcycles)
(R) colour of the vehicle
(S) seating capacity
(S.1) number of seats, including the driver’s seat
(S.2) number of standing places (where appropriate)
(T) maximum speed (in km/h)
(U) sound level
(U.1) stationary (in dB(A))
(U.2) engine speed (in min-1)
(U.3) drive-by (in dB(A))
(V) exhaust emissions
(V.1) CO (in g/km or G/kWh)
(V.2) HC (in g/km or g/kWh)
(V.3) NOx (in g/km or g/kWh)
(V.4) HC + NOx (in g/km)
(V.5) particulates for diesel (in g/km or g/kWh)
(V.6) corrected absorption coefficient for diesel (in min-1)
(V.7) CO2(in g/km)
(V.8) combined fuel consumption (in L/100 km)
(V.9) indication of the environmental category of EC type-approval; reference to the version applicable pursuant to Directive 70/220/EEC(2) or Directive 88/77/EEC(3)
(W) fuel tank(s) capacity (in litres)
Security features
Security paper
Location: Whole document
Characteristics: Security paper with a duotone continuous watermark (state coat of arms)
Method of verification: UV lamp
Fluorescent overprint
Location: Whole document
Characteristics: Red visible overprint with red fluorescence in UV light (rosette, lime tree leaves, state coat of arms)
Method of verification: Naked eye and UV lamp
Rainbow printing
Location: Whole document
Characteristics: Printed line structures with a smooth blue-orange colour transition
Method of verification: Magnifying glass
Background security printing
Location: Whole document
Characteristics: Fine designs consisting of intersecting continuous lines in a negative image in various motifs (geometric patterns, lime tree leaves, state coat of arms, etc.)
Method of verification: Magnifying glass
Numbering
Location: Front of the document, upper right corner
Characteristics: A serial number in red bleeding/penetrating security ink. Part of the numbering ink can be seen on the reverse side.
Method of verification: Naked eye and UV lamp
Hologram
Location: Front of the document, upper right corner
Characteristics: Metallic element with integrated 2D and 3D pictures, microstructures, kinetic and coloured effects
Method of verification: Naked eye with light from oblique angle, tilting
