Skip to main content
European Commission logo
Live, work, travel in the EU
Mobility & Transport - Road Safety

References

References

 

     

    References

    1. AA Policy and TMS Consultancy (1999) What goes wrong in highway design. AA Group Public Policy, Basingstoke
    2. Al-Masaeid, H.R. (1997) Impact of pavement condition on rural road accidents, Canadian Journal of Civil Engineering, V24, N4, pp. 523-531
    3. Al-Masaeid, H. R, Hammory, K., Al-Omari, B. (1999) Consistency of horizontal alignment under adverse weather conditions. Road & Transport Research
    4. Antonucci, N.D., Kennedy, K., Slack, K.L., Pfefer, R., Neuman, T. (2003) Guidance for implementation of the AASHTO Strategic Highway Safety Plan - Volume 5: A Guidance for Reducing Collisions at Signalized Intersections, NCHRP Report 500, Transportation Research Board
    5. ARRB Transport Research (1996) Review of accidents and rural cross section elements including roadsides, Australian Road Research Board, Melbourne
    6. Austroads(1994) Road Safety Audit
    7. Austroads (2002) Evaluation of the proposed actions emanating from road safety audits. Report AP-R209, Austroads, Sydney, Australia
    8. BASt(2003) Network safety Management BundesAnstalt fur Strassenwesen, Cologne
    9. Benekohal, R.F., Resende, P., Shim, E., Michaels, R.M., and Weeks, B. (1992) Highway Operations Problems of Elderly Drivers in Illinois. Publication No. FHWA-IL-023, Illinois Department of Transportation, Springfield, IL
    10. Bitzel, I.F (1957) Accident rates on German Expressways in relation to traffic volumes and geometric design, Roads and road construction
    11. Bonneson, J.A. (2000) Kinematic approach to horizontal curve transition design, Transportation Research Record Issue: 1737
    12. Bonneson, J., Zimmerman, K., Fitzpatrick, K (2005) Roadway safety design synthesis. FHWA/TX-05/0-4703-P1
    13. Council, F.M. (1998) Safety Benefits of Spiral Transitions on horizontal curves on two-lane rural roads, Transportation Research Record 1635, pp. 10-17, Transportation Research Board, Washington, DC.
    14. Danish Ministry of Transport (1997) Manual of Road Safety Audit, Danish Road Directorate
    15. Department for Transport (2003) Urban safety Management Guidelines. HMSO West Yorkshire
    16. Dunlap, D.F., Fancher, P.S., Scott, R.E., MacAdam, C.C. and Segel, L. (1978) Influence of combined highway grade and horizontal alignment on skidding, NCHRP Report 194, Transportation Research Board, Washington, DC
    17. DUMAS project (2000): Developing Urban Management and Safety - Final Report. Brussels: European Commission DG-VII.
    18. ECMT (2005) Life-Long Learning for Road Safety. Draft Reflection Note. Informal Meeting of the European Transport Ministers. Verona 4 - 5 November 2005
    19. Elvik, R. and Vaa, T. (2004) The Handbook of Road Safety Measures.Elsevier
    20. ETSC (1996) Low cost road and traffic engineering measures for casualty reduction European Transport Safety Council, Brussels
    21. ETSC (1997) Road safety audit and safety impact assessment European Transport Safety Council, Brussels
    22. ETSC (1998) Forgiving roadsides. ETSC Briefing note. European Transport Safety Council, Brussels
    23. European Commission (2001) DUMAS Final report, Brussels
    24. Farber, E., Janoff, M.S., Cristinzio, S., Bluebaugh, J.G, Reisener, W. and Dunning, W. (1974) Determining pavement skid resistance requirements at intersections and braking sites, NCHRP Report No 154, Transportation Research Board, Washington, DC
    25. FHWA Federal Highway Administration (2001) Young Drivers and Highway Design and Operations: Findings and Recommended Research. FHWA Research Update, Report No: FHWA-RD-01-120
    26. FHWA Federal Highway Administration (1992) 5 Volumes: Access Control, Alignment, Cross Section, Interchanges, Intersections, Publication No RD-91-047
    27. FHWA Federal Highway Administration(1992) Synthesis of safety research related to traffic control and roadway elements, Volumes 1 and 2, Report No FHWA-TS-82-233, Washington D.C., USA
    28. Fitzpatrick, Kay, Wooldridge, Mark, D., Blaschke, Joseph, D. (2005) Urban Intersection Design Guide: Volume 1 - Guidelines", Report No: FHWA/TX-05/0-4365-P2 Vol. 1
    29. Garner, G.R., Deen, R.C. (1973) Elements of Median Design in relation to accident occurrence, Highway Research Record 32, Highway Research Board.
    30. Glennon, J. (1985) Effect of Sight Distance on Highway safety, TRB
    31. Glennon, J.C., Neuman, T.R. and Leisch, J.E. (1985) Safety and operational considerations for design of rural highway curves, FHWA-RD-86-035, Federal Highway Administration, Washington, DC
    32. Gorell, R. and Toothill, W. (2001) Monitoring Local Authority Road Safety Schemes using MOLASSES. TRL Report TRL512. Transport Research Laboratory, Crowthorne
    33. Gothie, M. (1996) Relationship between Surface Characteristics and Accidents. Proc. 3rd International Symposium on Pavement Surface Characteristics, pp. 271-281
    34. Hassan, Y., Easa, S.M. (2000) Modeling of required preview sight distance, Journal of Transportation Engineering Volume: 126 Issue:
    35. Hassan, Y., Sayed, T., Bidulka, S. (2002) Influence of vertical alignment on horizontal curve perception: Phase II, modelling perceived radius, Transportation Research Record No: 1796
    36. HauerE. (1999) Safety and the choice of degree of curve, Transportation Research Record Issue: 1665
    37. HauerE. (2000) Highway Medians and Safety, review of literature for the Interactive Highway Safety Design Model, http://www.roadsafetyresearch.com/
    38. Hauer, E. (2000) Road grade and safety, review of literature for the interactive Highway Safety Design Model. http://www.roadsafetyresearch.com/
    39. Hauer, E. (2000) Safety of Horizontal Curves, review of literature for the interactive Highway Safety Design Model, http://www.roadsafetyresearch.com/
    40. Harwood, D.W., Council, F.M., Hauer, E., Hughes, W.E. and Vogt, A. (2000) "Prediction of the expected safety performance of rural two-lane highways", FHWA-RD-99-207, Federal Highway Administration
    41. IHT Institution of highways and transportation (1987) Roads and traffic in urban areas, Institution of highways and Transportation
    42. IHT Institution of highways and transportation (1990a) Guidelines for Accident Reduction and Prevention. International edition, London
    43. IHT Institution of highways and transportation (1990b) Guidelines for Urban Safety Management, London
    44. IHT Institution of highways and transportation (1990c) Guidelines for the Safety Audit of Highways, London
    45. Jorgensen Associates, Inc., (1978) Cost and Safety Effectiveness of Highway Design Elements. National Cooperative Highway Research Program Report No. 197, Transportation Research Board.
    46. Kanellaidis, G. (1991) Aspects of highway superelevation design. ASCE Journal of Transportation Engineering Vol 117 No 2
    47. Koornstra, M., Lynam, D., Nilsson, G., Noordzij, P., Pettersson, H-E, Wegman, F. and Wouters, P. (2002) SUNflower: A comparative study of the development of road safety in Sweden, the United Kingdom, and the Netherlands. SWOV, Leidschendam
    48. Knuiman, M.W. Council, F.M., Reinfurt, D.W. (1993) Association of median width and highway accident rates (with discussion and closure), Transportation Research Record Issue: 1401
    49. Kuciemba, S.R., Cirillo, J.A. (1992) Safety effectiveness of highway design features: Volume V, Intersections, FHWA-RD-91-048, Federal Highway Administration, Washington, DC
    50. Lamm, R., Psarianos, B., Mailaender, T.(1999) Highway Design and Traffic Safety Engineering, Handbook, McGraw Hill
    51. Lynam, D., Sutch,T., Broughton, J. and Lawson, S. (2003) European Road Assessment Programme Pilot Phase Technical report www.eurorap.org
    52. Lynam, D., Hummel, T., Barker, J. and Lawson, S. (2004) European Road Assessment Programme 1 (2003) Technical report www.eurorap.org
    53. Lynam, D. A. and Lawson, S.D. (2005) Potential for risk reductions on British inter-urban major roads. Traffic Engineering and Control.
    54. Machu, C. (1996) A new approach to improved road safety: safety checking of road infrastructure. Proceedings of FERSI International Conference on Road Safety in Europe, Birmingham, September 1996, VTI Konferens 7A(4), 19-28
    55. MASTER (1998) Managing Speeds of Traffic on European Roads. Final report. www.cordis.lu/transport/src/masterrep.htm
    56. Matthews, L.R., and Barnes, J.W., (1988). Relation between road environment and curve accidents. Proceedings, 14th ARRB Conference, Part 4, pp. 105-120
    57. Mullins, B.F.K, Keese, J.F. (1961) Freeway traffic accident analysis and safety study, Highway Research Board Bulletin 2915, Highway Research Board
    58. NCHRP (2005) Comprehensive Human Factors Guidelines for Road Systems. NCHRP Project 17-18 (8) Research results digest 296
    59. Neuman, T.R., Pfefer, R., Slack, K. L., Kennedy, K., Harwood, D., Potts, I., Torbic, D., Kohlman, E. (2003) Guidance for implementation of the AASHTO Strategic Highway Safety Plan - Volume 5: A Guidance for Addressing Unsignalized intersections Collisions, NCHRP Report 500, Transportation Research Board
    60. Noyce, D., Bahia, H., Yambó, J, Kim, G (2005) Incorporating road safety into pavement management: maximizing asphalt pavement surface friction for road safety improvements - draft Literature Review & State Surveys, Midwest Regional University Transportation Center, Traffic Operations and Safety (TOPS) Laboratory
    61. NRA (2000) Road Safety AuditHD 19/00 National Roads Authority, Ireland
    62. NystromK.et al. (1997) Median barrier study warrants review, Caltrans-TE-97-02. Sacramento, CA
    63. O'Cinneide, D., Troutbeck, R.J. (1998) At-grade intersections/worldwide review, Transportation Research Circular, International Symposium on Highway Geometric Design Practices, Boston
    64. OECD (1979) Traffic safety in residential areas, OECD Paris
    65. OECD (1990) Integrated traffic safety management in urban areas, OECD Paris
    66. OECD (1999) Safety strategies for rural roads, OECD Paris
    67. Ogden, K.W. (1997), The effects of paved shoulders on accidents on rural highways, Accident Analysis and Prevention Volume: 29 Issue: 3
    68. Page, B.G. and Butas, L.F. (1986) Evaluation of friction requirements for California state highways in terms of highway geometrics, Report FHWA/CA/TL-86-01, Office of Transportation Laboratory, California Department of Transport
    69. Perchonock, K; Ranney, T., Baum, S.,Morris, D., Epich, J. (1978) Hazardous effects of Highway features and roadside objects Volume 2: Findings, Report No FHWA - RD - 78-202, Federal Highway Administration
    70. PIARC Technical Committee on Road Safety (2003) Road Safety manual World Road Association
    71. Proctor, S., Belcher, M., and Cook, P. (2001) Practical Road Safety Auditing. TMS Consultancy and Thomas Telford Limited. London
    72. Promising Consortium (1998) PROMISING - Promotion of Measures for Vulnerable Road Users. Final Report, European Commission.
    73. Raff, M.S (1953) Interstate Highway Accident Study, Highway research board bulletin 74, Highway Research Board
    74. Rankers, Ranking for European Road Safety. Project for European Commissionhttp://www.rankers-project.com/
    75. RAS-L (1995) Richtlinien fuer die Anlage von Strassen, Teil: Linienfuehrung (RAS-L) Forschungsgesellschaft fuer Strassen- und Verkehrswesen (FGSV),Cologne
    76. RIPCORD-ISEREST, Road Infrastructure Safety Protection Core Research and Development - Increasing the Safety and Reliability of Secondary Roads. Project for European Commission www.ripcord-iserest.com
    77. SAFESTAR, Safety Standards for Road Design and Redesign. Project for European Commission www.cordis.lu/transport/src/safestar.htm
    78. Schelling, A. (1995) Road Safety Audit, the Danish experience. Proceedings of the FERSI International Conference Road Safety in Europe and Strategic Highway Research Program, Prague, September 1995. VTI Konferens 4A (4), 1-8
    79. Seneviratne, P.N., Islam, M.N.(1994) Optimum curvature for simple horizontal curves, Journal of Transportation Engineering Volume: 120 Issue: 5
    80. Service d'Études Techniques des Routes et Autoroutes (SETRA) and Centre d'Études des Transports Urbains (1992) Sécurité des routes et des rues. Service d'Études Techniques des Routes et Autoroutes, France
    81. Smith, B., Lamm, R. (1993) Coordination of Horizontal and Vertical Alignment with Regard to Highway Aesthetics, Transportation Research Record 1445, Transportation Research Board, Washington DC 73-85
    82. Smith, S.A., Purdy, J.E., McBee, H.W, Harwood, D.W, St John, A.D, Glennon, J.C. (1981) Identification, quantification and structuring of two-lane rural highway safety problems and solutions, Vol III - Physical and safety characteristics of two lane rural highways, unpublished appendix, JHK and Associates, Alexandria
    83. Szczuraszek, T., Kempa, J., Bebyn, G. and Chmielewski, J. (1999) Selection of the city road network elements with the lowest traffic level. Proceedings of Traffic Safety on Two Continents VTI Konferens 13A Part 4. Malmo Sweden
    84. Theeuwes, J. (1998) Self explaining roads: Subjective categorisation of road environments. In A .G.Gale, I D Brown, C M Haslegrave and S P Taylor (eds), Vision in Vehicles VI, North-Holland: Netherlands
    85. Tingvall, C. & Howarth, N. (1999) Vision Zero: an ethical approach to safety and mobility. The 6th Institute of Transport Engineers International Conference on Road Safety and Traffic Enforcement: Beyond 2000. Melbourne
    86. Torbic, D.J., Harwood, D.W., Gilmore, D., Pfefer, R., Neuman, T.R., Slack, K.L., Kennedy, K. (2003) Guidance for implementation of the AASHTO Strategic Highway Safety Plan - Volume 7: A Guidance for Reducing Collisions on Horizontal Curves, NCHRP Report 500, Transportation Research Board
    87. Transport Department (1992) Design Manual for Roads and Bridges - Layout of Grade Separated Junctions
    88. Transport Department (1993) Design Manual for Roads and Bridges - Highway Link Design, London
    89. Transport Department (1994-1) Design Manual for Roads and Bridges - Layout of Compact Grade Separated Junctions, London
    90. Transport Department (1994-2) Design Manual for Roads and Bridges - Skidding Resistance, London
    91. Transport Department (1995) Design Manual for Roads and Bridges - Geometric Design of Major/Minor Priority Junctions", London
    92. TRL Transport Research Laboratory (1984). Laboratory Report 1120: Accidents at 4-arm roundabouts
    93. TRL Transport Research Laboratory (1991). Research Report 296: The relationship between surface texture of roads and accidents
    94. Transit New Zealand (1993) New Zealand Road Safety Audit Manual
    95. TRB (2004). Transportation in an Aging Society: A Decade of Experience. Conference Proceedings. Transportation Research Board of the National Academies, Washington, DC
    96. Treve, H.(1997) Safety audit of existing roads in France. Proceedings of seminar K of PTRC European Transport Forum September 1997. PTRC London
    97. Treve, H.(2003) Crash against obstacles in urban areas: a real safety problem. Proceedings of European Transport Conference, Strasbourg.AET, London
    98. Turner, H. (1962) Influence of Road lighting on traffic safety and service
    99. Viner, H.E, Sinhal, R., Parry, A.R. (2005) Linking road traffic accidents with skid resistance - Recent UK developments, TRL Paper reference PA/INF4520/05
    100. Walker, R.J. (1993) Coordination of basic intersection design elements: an overview, Transportation Research Record Issue: 1385
    101. Wegman, F.(1997) A trail to a safer country - conceptual approaches to road safety policy", PIARC Committee on Road Safety WG No.1 "Safety Policy", SWOV Institute for Road Safety Research, Leidschendam, The Netherlands
    102. Wegman, F. & Aarts, L. (eds.) (2005) Door met Duurzaam Veilig [Advancing Sustainable Safety].SWOV Institute for Road Safety Research, Leidschendam (NL)
    103. Wegman, F., Dijkstra, A., Schermers, G. & van Vliet, P. (2005) Sustainable Safety in the Netherlands: the vision, the implementation and the safety effects. Proceedings of the 3rd International Symposium on Highway Geometric Design. Chicago, June 2005
    104. Wells, P. (1999) The Benefits of Road Safety Audit. Paper to European Road Safety conference, Malmo. VTI KonferensSweden
    105. Zegeer, C.V., Mayes, J. and Deen, R. (1981) Effect of lane and shoulder width on accident reduction on rural two-lane roads TRR 806, TRB, National Research Council, Washington, D.C.
    106. Zegeer, C., Hummer, J., Reinfurt, D. (1987) Safety effects of cross section design for two lane roads, FHWA, Report No RD, 87-094
    107. Zegeer, C.V., Twomey, J.M., Heckman, M.L., and Hayward, J.C. (1992) Safety effectiveness of highway design features: Volume II, Alignment, FHWA-RD-91-045, Federal Highway Administration, Washington, DC
    108. Zegeer, C. V., Stewart, R., Council, F., and Neuman, T. (1994) Accident relationships of roadway width on low volume roads. Transportation Research Record. 1445, 160-168
    109. Zegeer, C.V., Council, F.M. (1995) Safety relationships associated with cross-sectional roadway elements, Transportation Research Record Issue: 1512